No FCC license is required for all components.   1008CK - Cluster Management Module Includes: GPS Receiver Antenna for automatic AP synchronization Built-in Ethernet switch AC power supply for 6 Canopy AP Units and 2 Canopy BH Units   5200AP / 5700AP- Canopy AP Module CMeasure 11.75" x 3.4" x 3.4" 10/100baseT Ethernet connection UL-approved   5200SM / 5700SM - Canopy SM Measures 11.75" x 3.4" x 3.4" Single cable ­ standard RJ45, 8-pin Ethernet 10/100baseT Ethernet connection Simple indoor AC adapter UL-approved   5700BH - Canopy BackHaul Unit Measure 11.75" x 3.4" x 3.4" BH Unit @ 5.8GHz, non-interfering with 5200AP to 5200SM link 10/100baseT Ethernet connection UL- approved   300SS - Canopy Surge Supressor Optional surge suppressor for Ethernet cable connection. Outdoor mountable, and includes connection for a grounding tap.     0 0 0 0 0 0 0 0    Canopy™ is faster than any other ISP option and delivers more reliable service. Canopy delivers Internet data in small data packets that reduce interference and use a fraction of the 'air time' of other systems. Your customers always get fast, reliable Internet service.   Canopy.™ Internet delivery without the wait - For You Canopy Wireless broadband platform makes becoming an Internet Service Provider faster and less costly than ever before. CANOPY IS AFFORDABLE Canopy operates in the unlicensed 5GHz U-NII band, so there's no need for spectrum acquisition or site licensing. And, because Canopy is wireless, there's no need to go through existing phone or cable network. CANOPY IS EASY TO INSTALL AND OPERATEIts simple network design makes it easy to install. And, with Canopy's small cells, there is no need for coordination, so a single-site Canopy system can begin serving a surrounding two-mile community right away. What's more, Canopy AP Units include all the user authorization, network management, and diagnostic capabilities you need to remotely control and monitor your network.   CANOPY IS FLEXIBLECanopy can be adopted to serve the needs of many customer communities. The Point-to-Multipoint application can deliver service to homes or small businesses - or serve as a dedicated data link for small business applications. CANOPY IS SCALABLE Intelligent protocols make deployment and operation of large wireless networks easy and cost effective. Canopy is scalable to accommodate changing needs, wider geographical areas, larger populations and higher traffic volumes. Further, adding additional transceivers increases capacity without interference. For Your Customer The Canopy Subscriber Module is small and easy to install at the customer's site. And there's no additional software for your customer to install. CANOPY IS FASTCanopy offers the affordable, high-speed Internet connection your customers have been waiting for. Canopy upload and download speeds are as fast or faster than dial-up, ISDN, DSL, MMDS, cable or satellite access*. CANOPY IS AFFORDABLECanopy closes the gap between the cost of dial-up and broadband access, making the decision to switch easy for everyone. CANOPY DELIVERS OUTSTANDING PERFORMANCECanopy's proprietary modulation scheme improves the quality of data delivery and mitigates interference from other systems. So, data delivery with Canopy is very reliable. CANOPY IS SECURECanopy offers security with over-the-air encryption scrambles data bits and prevents interception.  Canopy" Access Point Cluster and Cluster Management ModuleS Canopy Access Point Module 5200AP/5700AP Operating Frequency Range U-NII Mid band 5.25 to 5.35 GHz and 5.725 to 5.825 GHz Access Method TDD/TDMA Signaling Rate 10 Mbps Modulation Type High Index BFSK (Optimized for interference rejection) Carrier to Interference (C/I) 3dB 10-4 BER @ -65 dBm Receiver Sensitivity -83dBm 10-4 BER Operating Range Up to 2 miles with integrated antenna in the 5.2 GHz band.  Up to 10 miles with passive reflector in the 5.7 GHz band. Transmitter Power Meets FCC UNII ERP Limit DC Power 24 VDC @ 0.3 Amp (active state) Interface 10/100 BaseT, half/full duplex Rate auto negotiated (802.3 compliant) Protocols Used by CANOPY IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP Software Upgrade Path Remotely downloaded into FLASH via RF link Network Management HTTP, TELNET, FTP, SNMP Wind 190 km/hr (118 miles/hr) Operating Temperature -40°C to +55°C (-40°F - +131°F) Weight 1 lb. (.45kg) Dimensions 11.75" H x 3.4" W x 3.4" D  (29.9 cm H x 8.6 cm W x 8.6 cm D)   Limits or Conditions Canopy Cluster Management Module 1008CK Max length any one radio can be from Cluster Management Module 100 Meters Dimensions 11.75 H x 15.0 W x 6.25 D (29.9 cm H x 38.1 cm W x 41.3 cm D) Weight 19.0 lbs. (8.6 kg) Operating Temperature -40°C - +55°C (-40°F - +131°F) AC input voltage 90 VAC to 260 VAC AC frequency 47 to 63 Hz AC input power 75 W Typical with 8 radios, 90 W max at 120 VRMS AC inrush current (cold start c40C) 25A at 115 VAC 50A at 240 VAC EMI emissions FCC part 15, class A   24 VDC Power Supply 24 VDC @ 12A Radios 100 Meters maximum from Cluster Management Module   12 VDC Power Supply (Note: very limited cable distances) Radios 20 feet maximum from Cluster Management Module (8 radios), Power supply can be 10 feet from Cluster Management Module with Min. 12 gauge copper wire. 5.68A typical   Grounding Cluster Management Module Must use 10 gauge copper wire to attach one end to the chassis plate in the Cluster Management and the other end to earth ground, per National Electrical Code (NEC).   Cable Specifications Ethernet, GPS sync, and GPS coax cables The use of cables that conform to the operational temperature of the product as well as being UV light protected is mandatory   GPS Keep Alive battery power Upon power up, Cluster Management needs 5-minutes to recover GPS timing pulse. It is strongly recommended to have an uninterrupted power supply (UPS) back up on the Cluster Management Module power system.   Ethernet Switch Switch type "Unmanaged", "Store forward" Ethernet protocols supported All standard IEEE 802.3 Full or half duplex operation Auto-sensing     Canopy" Subscriber Module   Canopy Subscriber Module 5200SM/5700SM Operating Frequency Range U-NII Mid band 5.25 to 5.35 GHz and 5.725 to 5.825 GHz Access Method TDD/TDMA Signaling Rate 10 Mbps Modulation Type High Index BFSK (Optimized for interference rejection) Carrier to Interference (C/I) 3dB, 10-4 BER @ -65 dBm Receiver Sensitivity -83dBm 10-4 BER Operating Range (all weather) Up to 2 miles with integrated antenna in the 5.2 GHz band. Up to 10 mile with passive reflector in the 5.7 GHz band. Transmitter Power Meets FCC UNII ERP Limit DC Power 24 VDC @ 0.3 Amp (active state) Interface 10/100 BaseT, half/full duplex Rate auto negotiated (802.3 compliant) Protocols Supported by CANOPY Switched Layer 2 Transport with support for all common Ethernet protocols including IPV6, NetBIOS, DHCP, IPX, etc. Protocols Used by CANOPY IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP Software Upgrade Path Remotely downloaded into FLASH via RF link Network Management HTTP, TELNET, FTP, SNMP Wind 190 km/hr (118 miles/hr) Operating Temperature -40°C to +55°C (-40°F - +131°F) Weight 1 lb. (.45kg) Dimensions 11.75 H x 3.4 W x 3.4 D (29.9 cm H x 8.6 cm W x 8.6 cm D)     Canopy" Backhaul Module   Canopy Backhaul Module 5700BH Operating Frequency Range U-NII Mid band 5.725 to 5.825 GHz Access Method TDD/TDMA Signaling Rate 10 Mbps Modulation Type High Index BFSK (Optimized for interference rejection) Carrier to Interference (C/I) 3dB, 10-4 BER @ -65 dBm Receiver Sensitivity -83dBm 10-4 BER Operating Range (all weather) Up to 2 miles with integrated antenna. Up to 35 miles with installed passive reflectors. Transmitter Power Meets FCC UNII ERP Limit DC Power 24 VDC @ 0.3 Amp (active state) Interface 10/100 BaseT, half/full duplex Rate auto negotiated (802.3 compliant) Protocols Supported by CANOPY Switched Layer 2 Transport with support for all common Ethernet protocols including IPV6, NetBIOS, DHCP, IPX, etc. Protocols Used by CANOPY IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP Software Upgrade Path Remotely downloaded into FLASH via RF link Network Management HTTP, TELNET, FTP, SNMP Wind 190 km/hr (118 miles/hr) Operating Temperature -40°C to +55°C (-40°F - +131°F) Weight 1 lb. (.45kg) Weight With Passive Reflector 6.5 lbs. (3 kg) Dimensions 11.75 H x 3.4 W x 3.4 D (29.9 cm H x 8.6 cm W x 8.6 cm D)       Canopy" Surge Suppresor   Canopy Surge Suppressor 300SS Dimensions H 5.2 x W 5.0 x D1.7 H 132 mm x W 127 mm x D 43.2 mm Space between mounting holes 4.25 (108 mm) Size of Knockouts 0.75 (19 mm) Weight 0.4 lbs. (180 g) Operating Temperature -40°C to +55°C (-40°F to 131°F) Internal Connectors RJ45 Capacity 1500J peak pulse energy dissipation with 10/10000µs waveform   Special  Order a 5.2 GHz Trial Kit Part # TK10003 Call Toll Free (888) 588-3800 Ext 21 http://www.canopywireless.com/mainsite/html/hardware.php#   Trial Kit is also available in 5.7 GHz Model  Part# TK1004 Includes One 5.7GHz AP, Two 5.7GHz Subscriber Modules, mounting kit, a 27RD reflector, Three power supplies and surge Supressor Call Toll Free (888) 588-3800 Ext 21

LE FastCounter

Copyright (c) 1998 - 2003 HD Communications Corp. 2180 Fifth Ave, Ronkonkoma, NY 11779 USA  Toll Free in USA & Canada (888) 588-3800, Int. Customers Tel. 1 (631) 588-3877  Worldwide Fax. (631) 588-3879

**FCC Notice: Whenever changing,replacing,installing,amplifiers,antennas,cables, additional components not part of the OEM 802.11 product the installer must understand and follow the requirements of FCC part 15. If assistance is needed please contact us or download a copy of Part15 from the FCC website